VeeCU Installation

[Bryan_Cotton]

@WesRagle

Anyone familiar with Sonex baffling knows that without the sides installed there is nothing holding the front lip in place.

May I present:

Baffle optomizations

Up until I did these mods, my front baffle would sit nicely against the motor and I would glue it down with RTV. Right or wrong, the only fasteners I had for the front baffle was a pair of screws on either side. But now I had this big gap behind the prop and that’s no good. So I added some straps and fastened them onto the big M10x1.25 holes in the front. [front straps head on view] I have a 1” square of 1/8” aluminum with one edge radiused. That’s what is clamping the strap in place. […