# VeeCU Installation **URL:** \ **Category:** Fuel System\ **Created:** [November 24, 2025, 6:14pm UTC](https://sonexpilots.org/t/veecu-installation/5204 "2025-11-24T18:14:06Z")\ **Posts on this page:** 1\ **Showing post:** 44
**Author:** ![Bryan\_Cotton](https://sonexpilots.org/user_avatar/sonexpilots.org/bryan_cotton/32/760_2.png) [@Bryan\_Cotton](https://sonexpilots.org/u/Bryan_Cotton)\ **Post date:** [September 23, 2026, 6:11pm UTC](https://sonexpilots.org/t/veecu-installation/5204/44 "2026-09-23T18:11:46Z")
> [@WesRagle](#): > > Anyone familiar with Sonex baffling knows that without the sides installed there is nothing holding the front lip in place. May I present: > [@Baffle optomizations](https://sonexpilots.org/t/baffle-optomizations/4003/15): > > Up until I did these mods, my front baffle would sit nicely against the motor and I would glue it down with RTV. Right or wrong, the only fasteners I had for the front baffle was a pair of screws on either side. But now I had this big gap behind the prop and that’s no good. So I added some straps and fastened them onto the big M10x1.25 holes in the front. I have a 1” square of 1/8” aluminum with one edge radiused. That’s what is clamping the strap in place. --- _[View the full topic](https://sonexpilots.org/t/veecu-installation/5204)._