# Dynon display
**URL:** https://sonexpilots.org/t/dynon-display/5425
**Category:** Onex
**Created:** [February 13, 2026, 7:42pm UTC](https://sonexpilots.org/t/dynon-display/5425 "2026-02-13T19:42:16Z")
**Posts on this page:** 5
**Page:** 1
### Author:  [@Txairmale](https://sonexpilots.org/u/Txairmale)
#### Post date: [February 13, 2026, 7:42pm UTC](https://sonexpilots.org/t/dynon-display/5425/1 "2026-02-13T19:42:17Z")
I have received conflicting information. Is the Dynon compatible with the AeroVee Turbo sensors?
---
### Author:  [@ampzapper](https://sonexpilots.org/u/ampzapper)
#### Post date: [February 13, 2026, 8:27pm UTC](https://sonexpilots.org/t/dynon-display/5425/2 "2026-02-13T20:27:51Z")
Which display? One of the older EMS-Dxx ones or a newer Skyview with an SV-EMS-220 module?
---
### Author:  [@Txairmale](https://sonexpilots.org/u/Txairmale)
#### Post date: [February 13, 2026, 9:20pm UTC](https://sonexpilots.org/t/dynon-display/5425/3 "2026-02-13T21:20:12Z")
I have not purchased anything yet but I was considering the 7” Skyview.
---
### Author:  [@ampzapper](https://sonexpilots.org/u/ampzapper)
#### Post date: [February 16, 2026, 6:42pm UTC](https://sonexpilots.org/t/dynon-display/5425/4 "2026-02-16T18:42:00Z")
There’s a guy here that said put in a Dynon Skyview system with an Aerovee turbo:
> [@Considering a sonex but still would like info on some specs](https://sonexpilots.org/t/considering-a-sonex-but-still-would-like-info-on-some-specs/1628):
>
> Considering a sonex but still would like info on some specs. Posted: Sat Mar 06, 2021 11:21 am by AstroAussie Hey guys! Hoping you to get some info from those who have had their sonex for a while now and those near completion. I was curious if you guys can let me know in terms of weight and balance the most weight I can add in terms of instrumentation if I were to go with the Aerovee Turbo engine. I know this is a topic that has been discussed in the past but I am thinking of a sonex B with I…
I’m curious where you saw it wouldn’t work. The biggest difference would be the MAP sensor and Dynon MAP sensor is good for 0-60 InHg where the MGL one is good for 6-74 InHg which is a difference but 60 inHg still seems like it would work from what I’ve seen but I don’t know the full operation limits.
Some of the MAP/pressure sensors don’t work with the older Dxx stuff but that wouldn’t be an issue.
The Dynon SV-EMS-220 also has 6/ea of J and K type thermocouples with should be plenty. I can’t come up with any other reason why it wouldn’t work.
---
### Author:  [@Txairmale](https://sonexpilots.org/u/Txairmale)
#### Post date: [February 17, 2026, 7:03pm UTC](https://sonexpilots.org/t/dynon-display/5425/5 "2026-02-17T19:03:43Z")
Thank you very much, that is good news. My information was dated at best. I had to set the project aside for awhile and then just concentrated on finishing the airframe. I am almost there and looking ahead to avionics. When I first looked into it I contacted Dynon with the simple ask of whether their products would interface with the AeroVee and got a simple “no” so I never looked further. Some recent notes led me to re-evaluate and here I am! There is a lot of experience in my EAA chapter with Dynon so I am happy to hear the EMS-220 will get me there. Thank you.